Logo F2FInterview

WAN Interview Questions

Q   |   QA

A technology called VLAN (Virtual LAN broadcast domains logically segmented on an Ethernet switch) trunking that was once primarily the domain of network switches has now trickled down to the rest of the Data Center to address these issues. Now it is possible for these multi-homing devices to be multi-homing in function without the need for multiple physical network adapters and the additional infrastructure associated with them. VLAN trunking allows a single network adapter to behave as ?n? number of virtual network adapters, where ?n? has a theoretical upper limit of 4096 but is typically limited to 1000 VLAN network segments. In the case where a single gigabit Ethernet adapter is trunked in place of using multiple FastEthernet adapters, higher performance at a lower cost while increasing flexibility can be achieved. This really is the best of all worlds. In this article, I will give you an overview of VLAN trunking, how it works what it is used for.

VLAN is a technology by which we can administratively assign different ports of the same layer2 switch to different subnetworks. This is particularly useful when different departments of a company have offices in different floors of the same office. The different departments can be connected via a layer2 switch , which is having configuration for other subnetwork also. So practically the same switch acts as if it is more than one. Packets destined for the specific subnetwork are forwarded to those ports only. But the switch does not make any routing decisions. For interconnecting different subnetworks, routers are needed.
VLAN essentially provides segmentation between different subnetworks. 

Wide-mouth frog is the simplest known key distribution center (KDC) authentication protocol.

When hierarchical routing is used, the routers are divided into what we call regions, with each router knowing all the details about how to route packets to destinations within its own region, but knowing nothing about the internal structure of other regions. 

Normally in IP address in fourth tab usually they will give the serial number of the using computer. in that case we can say how many computers are there. if not its impossiable to say.

This all depends on the type of IP address.That is the class it belongs to.All that is needed to be done is to subnet the given IP adress.

This is very simple open my network place and select work group in work group count no. of systems by name of computers. 

The address for a device as it is identified at the Media Access Control (MAC) layer in the network architecture. MAC address is usually stored in ROM on the network adapter card and is unique.

MAC (Media Access Control) address is a unique address of a device and stored in ROM on the network adapter card. it is 48 bit long. 

Wide Area Network (WAN) is a computer network that covers a broad area (i.e., any network whose communications links cross metropolitan, regional, or national boundaries

WAN-Wide Area Network.....many MANS are joined to form a WAN.It carry voice,data &speech efficiently through very long distances...may be through out the country.The most Common & readily understandable example is INTERNET 

In order to link this F2FInterview's page as Reference on your website or Blog, click on below text area and pres (CTRL-C) to copy the code in clipboard or right click then copy the following lines after that paste into your website or Blog.

Get Reference Link To This Page: (copy below code by (CTRL-C) and paste into your website or Blog)
HTML Rendering of above code: